Recently having decided to build a midi foot controller, I needed the stomp switch that was controlling the fan on board my speaker load sim.
Which meant for me, redesigning the cabinet load sim. housing.
I've wanted to do this for a while; while the last one was grungy as fuck, space future looks better.
+Thermal glue under the original circuit to bind it with a ~4x4x4ish inch fin cube heat sink from dream land
+rewire circuit with insulated copper braid
+wire jack (original jack to the speaker load, self-terminating pins removed. Resulting jack is dual terminal T/S. )
+Drill jack hole in second heat sink fin thing
+cut notches in fin thing sides
+Boosh --k - k - k - killzone
Which meant for me, redesigning the cabinet load sim. housing.
I've wanted to do this for a while; while the last one was grungy as fuck, space future looks better.
+Thermal glue under the original circuit to bind it with a ~4x4x4ish inch fin cube heat sink from dream land
+rewire circuit with insulated copper braid
+wire jack (original jack to the speaker load, self-terminating pins removed. Resulting jack is dual terminal T/S. )
+Drill jack hole in second heat sink fin thing
+cut notches in fin thing sides
+Boosh --k - k - k - killzone
No comments:
Post a Comment